FE Model of Frontal Sled Reclined uploaded
The FE model of the Reclined Frontal Sled Load Case was uploaded to the TUC Validation Repository in LS-Dyna and VPS. The model was developed in cooperation OSCCAR.
Similar Posts
Validation Protocol updated
The Validation Protocol of the Whole-Body Pedestrian Load Case was updated and complemented to the TUC Validation Repository.
FE Model of Lumbar Disk Compression uploaded
The FE model of the Lumbar Intervertebral Disk Compression was uploaded to the TUC Validation Repository in LS-Dyna. The model was developed in cooperation with BMW AG.
FE Model of SAE pedestrian buck uploaded
The FE model of the SAE pedestrian buck model was uploaded to the TUC Validation Repository as beta-model in VPS. The model can be used to validate a HBM in a whole-body pedestrian impact against a generic vehicle front according…
FE Model of Far-Side Load Case uploaded
The FE model of the Far-Side Load Case was uploaded to the TUC Validation Repository in LS-Dyna and VPS. The model was developed in cooperation with Autoliv.
FE Model of SENIORS Sled uploaded
The FE model of the SENIORS Sled was uploaded to the TUC Validation Repository as beta-model in VPS. The model was developed in cooperation with AUDI AG.
ANSA articulation tool metadata available for THUMS TUC model
Upon request, BETA CAE Systems has created metadata for the THUMS TUC model that will be used for the ANSA Articulation Tool. Where possible, the reference points of the joints defined by the TUC project were used for this purpose….